Filter specs vs Functional specs – the pitfall of double margining

技术性说明, 知识库, 精选文章

In designing a filter solution, the filter manufacturer takes the values requested by the user and adds additional design margin to account for both functional effects (such as wavelength shift due to angle variation, thermal induced wavelength shift, etc) and filter manufacturing effects (such as edge steepness, nonuniformity, wavelength targeting – see our technical note “Wavelength budgeting for optical filters”).

Often customers translate functional requirements of their system (e.g. pass light source 1 @ λ1, block light source 2 @ λ2) and add wavelength “padding” to the values to create the “filter spec” (e.g. CWL, FWHM, etc).   When the values provided have been “padded” the result is over margining (or under margining) of the transmission/blocking wavelengths. This result is a more costly solution with compromised performance. Given the functional requirements of your system, Iridian’s expert designers can produce a filter specification that will provide the best performance for your request.

 

Provide the spectral bands of your application (including all uncertainties)Specify a CWL, FWHM, etc. with assumptions on manufacturing margin
Provide the AOI range and cone angle of your beamSpecify spectral widths assuming certain AOI shifts
Provide the functional requirement for spectral width and depth of blocking bandsAdd margin to spectral width or depth which adds unnecessary cost and can degrade overall performance.

 

更多的资讯

定制询价

 

浏览线上产品目录

线上购买

线上购买或者定制询价

联系我们

电话: +1 (613) 741-4513
传真: +1 (613) 741-9986

电邮: istsales1@idexcorp.com